Brand: Trend
Model: SET/SS8x1/4TC
This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking.
Excellent value for money.
Supplied in plastic carry case..
£42.50
Ex Tax:£42.50
Brand: Trend
Model: SET/SS9x1/2TC
Fifteen piece cutter set, containing a range of popular cutters.
Supplied in a plastic carry case...
£59.78
Ex Tax:£59.78
Model: C207X1/2TC
Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. This cutter is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations...
£63.20
Ex Tax:£63.20
Model: C041AX1/4TC
These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs...
£19.90
Ex Tax:£19.90
Model: C152X1/2TC
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit is required for ease of alignment durin..
£43.60
Ex Tax:£43.60
Model: C152X1/4TC
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit is required for ease of alignment durin..
£42.10
Ex Tax:£42.10
Model: C049X1/4TC
Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath...
£29.89
Ex Tax:£29.89
Model: C130X1/4TC
Attractive edge moulds. A full corner bead
can be produced by making a second pass at 90 degrees...
£45.70
Ex Tax:£45.70
Model: C079X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from th..
£44.25
Ex Tax:£44.25
Model: C076X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from th..
£40.95
Ex Tax:£40.95
Model: C078X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the..
£46.25
Ex Tax:£46.25
Model: C121X1/4TC
Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage...
£21.50
Ex Tax:£21.50