Indexing Plate for Viper2 Chuck. The indexing plate fits onto the back of the Viper2 chuck, replacing the blank plate supplied as standard. It has 24 numbered positions set out at 15 degree intervals. Each position has a pin hole in the back of the plate and a slot in the side of the plate. An index..
Face Plate Ring for Viper2 Chuck. The face plate ring has a 65mm outside diameter and has a dovetail shaped inside which can be gripped by using the standard Viper2 jaws. The face plate ring has 8 countersunk screw holes and is used instead of a threaded face plate so that you do not have to remove ..
Pin Jaws for Viper2 Chuck. Set of 4 optional jaws for Viper2 geared scroll chuck. Pin jaws allow smaller pieces to held than the standard jaws. The inside is smooth and parallel, the outside is serrated for maximum grip. The jaws project 29mm from the base plate. Expands from 22mm to 46mm Contracts ..
Round Jaws, serrated both sides for Viper2 Chuck. Set of 4 optional jaws for our Viper2 geared scroll chuck. These parallel sided jaws have a serrated edge both internally and externally for maximum gripping of both recesses and spigots. Jaw projects 12mm from the base plate. Expands from 38mm to 62..
Stepped Jaws for Viper2 Chuck.
Set of 4 optional jaws for our Viper2 geared scroll chuck. The Stepped jaws have a serrated edge both internally and externally. They give great flexibility by combining standard sized jaws and pin jaws.
Step 1 Expands from 18mm to 42mm
Step 2 Expands fr..
Wide Jaws for Viper2 Chuck.
Set of 4 optional jaws for Viper2 geared scroll chuck. The Wide jaws have a serrated edge both internally and externally and can grip much larger pieces than the standard jaws. Projects 13mm from base plate.
Expands from 70mm to 94mm
Contracts from 82mm to ..
Ripple Jaws for Viper2 Chuck.
Set of 4 optional jaws for the Viper2 geared scroll chuck. The Ripple pattern on both the inside and outside of these jaws is designed to give a strong grip on rough or even bark covered wood. Jaws project 24mm from the base plate.
Expands from 42mm to 66mm
Extended Dovetail Jaws, square hole inside for Viper2 Chuck.
Set of 4 optional jaws for our Viper2 scroll chuck. These extended pin jaws have are dovetailed on the outside. The internal edge is flat, forming a square when closed, perfect for gripping square shaped spigots. The jaws project 42mm f..
Bowl Reversing Jaws 5" Diameter for Viper2 Chuck.
Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks.
The jaws are 120mm diameter when closed, 144mm diameter..
Long Reach T-Handle for Viper Chuck.
This extended handle is longer than the one originally supplied with the chuck and is of benefit to people working on larger diameter bowls. The handle will clear bowls of up to 14'' diameter on the Viper2, 15" on the Viper3..