Your Cart
Coronavirus Update details

Translucent Tinting Pigment (10pack)

Translucent Tinting Pigment (10pack)
Translucent Tinting Pigment (10pack)
Translucent Tinting Pigment (10pack)
Translucent Tinting Pigment (10pack)
Translucent Tinting Pigment (10pack)

A set of 10 high quality translucent tinting pigments intended for creating subtle tints or translucent colouring of water-clear casting resins including polyester, polyurethane and epoxy casting resins.

The set comprises of 10 vivid colours ideal for tinting or pigmenting jewellery, sculptures and design prototypes with anywhere between a faint hint of colour to a very strong, yet still translucent colour.

Only a tiny drop of these specially developed pigments is needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin. In fact, a subtle tinting effect can be achieved with less than 0.0004% (1 droplet in a 35g casting) and so each bottle is capable of tinting 40kgs of resin!

This pack of 10 popular colours includes:

  • 25ml Red
  • 25ml Green
  • 25ml Blue
  • 25ml Purple
  • 25ml Yellow
  • 25ml Orange
  • 25ml Burnt Sienna
  • 25ml Black (for 'Tinted' or 'Smoked' effect)
  • 25ml Prussian Blue
  • 25ml Turquoise

How to Use

When 'tinting' clear resins the key is to use only a tiny amount of these translucent pigments. 1 droplet is enough to pigment around 20-40g of resin, depending on how strong you want the colour tint to be.

Remember that thicker castings will require a lower percentage of pigment because the tint will appear stronger the thicker the section is. Conversely, thinner castings will require a higher percentage of pigment in order to appear to be the same colour as thicker castings.

Dispersing the Pigment

The pigments disperse very quickly into epoxy resin and polyurethane resin. When using the pigments to tint larger quantities of polyester resin it is recommended to make a resin 'dispersion' by mixing the pigment into a small amount of the resin first and then mixing the small pigmented batch of resin into the larger batch to aid distribution of the pigment throughout the resin.

When pigmenting more reactive materials such as fast curing polyurethanes you will find it helpful to mix the pigment into one side of the resin (either part A or part B) thoroughly before mixing the two parts together and starting the reaction. This allows as much time as is needed to thoroughly disperse the pigment before starting the reaction. If you do choose to pigment just one side of the resin first it's helpful to remember that the addition of the second half of the resin will 'dilute' the tint when you add it.

Write a review

Note: HTML is not translated!
Bad Good
Ex Tax: £14.95
  • Stock: In Stock
  • Model: TTP10
  • SKU: TTP10
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.