1or 2 Morse Taper collet type pen mandrel as used in our kit. The collet that secures the mounting shaft ensures that the shaft is locked and centered in position to guarantee a perfectly centred pen. The shaft slides inside the collet so that it can be lengthened or shortened to adapt to the length..
This Pen Press has been designed to be used in conjunction with your lathe. There are two nylon pads, the white one has a small dimple in the centre to hold the nib of the pen in line, the black pad has a concave dome cut into it to make sure the other end of the pen is also held central and stops i..
The collet type mandrel is quick to adjust and offers a stronger action than traditional mandrels. The collet that secures the mounting shaft insures that the shaft is locked and centered in position to guarantee a perfectly centred pen. The shaft slides inside the collet so that it can be lengthene..
This universal barrel trimmer comes supplied with a 6.18mm trimming shaft suitable for all 7mm tube pens.
To use the trimmer it can either be locked into our collet mandrel for use on the lathe or can be used on a pillar drill in conjunction with our Pen Blank Vice.
Can be used with any wood o..
This kit comes with 8.64mm, 9.15mm & 9.9mm trimming shafts to suit 3/8", 10mm & 27/64" Tubes.
Simply use these shafts in conjunction with the cutter head from our PENBT pen barrel trimmer.
To use the trimmer it can either be locked into our collet mandrel for use on the lathe or can be used on a p..
This tool makes the insertion of tubes an easy task.
The tool is tapered so any diameter of tube can be fitted, eliminating the risk of damage as the tube is supported from the inside and therefore keeps its shape...
This set has been designed for turning resin.The
set consists of :-
Two blades: a
spindle roughing gouge and a tipped HSS Cutter (827C) tool along
with the longer aluminium handle from the Robert Sorby
Modular Micro Tool System, two allen keys and&..