Charnwood 10'' Bandsaw
A medium sized bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the blade and keep it true. Finished off with a durable powder coated paint.
Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8" blade, NVR switch, 60mm diameter extraction outlet, cable and plug.
- Precision Ground Cast Iron Table
- Quick Lock Fence
- Quiet Induction Motor
- Crosscutting Mitre Guide Included
- 4'' Cutting Depth
- 10'' Cutting Width (Throat)
- Blade Length 1712mm (67'')
PLEASE NOTE CARRIAGE IS EXTRA AS STATED BELOW